Eaton SC200 V3 power system controller

Wednesday, 02 December, 2009


The SC200 V3 power system controller for telecommunications network operators features automated site energy-control options.

It has two site-programmable options. Smart Alarms uses Boolean logic to control individual network sites automatically, across a range of site variables, for management of issues such as: peak grid-power periods or cooling by automatically controlling non-critical loads; intelligent management of cooling to reduce overall energy use; running an outdoor suburban power cabinet on low noise mode at night; or customising site alarms to match network management requirements.

The Eaton Fuel Saver (EFS) for hybrid network sites uses a diesel generator as a backup to a poor alternating current grid supply, or where the site runs entirely on generator, 24 hours a day, every day. EFS delays generator starts, first engaging the site’s battery bank to either bridge a grid power outage or delay the generator start for as long as possible, reducing diesel consumption and refuelling visits, and reducing generator wear and tear and servicing costs.

Related Products

Advantech FPM-200 Series industrial monitors

The FPM-200 series of industrial monitors from Advantech features IP-66 rated front panels and a...

Schneider Electric EcoStruxure Micro Data Centre

Schneider Electric's EcoStruxure Micro Data Centre is designed to support distributed IT...

Schneider Electric RD300 InRow Direct Expansion cooling solution

The Schneider Electric RD300 series of InRow Direct Expansion units are a close-coupled cooling...


  • All content Copyright © 2024 Westwick-Farrow Pty Ltd